Voyager Portable Headphone Amplifier by Graham Slee

A pocket sized portable headphone amplifier that sounds like a big hi-fi headphone amplifier!

New portable headphone amp meets with approval at Manchester's UK Head-Fi Meet...

"I had a chance to listen to a Graham Slee Voyager Portable Headphone Amplifier and oh my God, this thing sounds amazing. It drove my HD600's (300 Ohms) to much higher volume levels without any distortion and everything sounded so much fuller, if I closed my eyes I could have sworn I was listening to a tube amp!! This is on my shopping list as my next portable amp, simply stunning."

"...hear the music - see the light!"

Voyager portable stereo headphone amplifier sets a new standard

Ask those who've heard the new Voyager portable headphone amp and they'll tell you it's amazing!

It has a powerful bass line - sweet but uncoloured midrange and the highs are crystal clear.

It presents a believable stereo image, and portrays music with the emotion with which it was laid-down.

Graham Slee Voyager Portable Headphone Amplifier

But what about portable headphone amplifiers and street-wear headphones?

The Voyager portable headphone amplifier features a contour switch to equalise street-wear headphones, emulating the sound you get from "home" or hi-fi headphones - putting back that missing bottom-end bass and replacing the usual scratchy highs with the whole clarity that makes this portable headphone amplifier "hard to switch-off".

The Voyager Portable Headphone Amplifier

The Voyager is a truly portable headphone amplifier. It is small and light enough to fit a shirt pocket! It also has a similar "footprint" to a regular pod player which will sit on top. It connects using a supplied jack-lead and even via a pod player's headphone out, sounds remarkably good, saving the need for an expensive dock connector.

Price

Voyager portable headphone amplifier (includes plug-top power supply, battery and jack-lead)
£179.89
$350.00 approx.

The Voyager portable headphone amplifier creates its own trend...

Rather than cramming-in "Whistles and Bells" features, it simply concentrates on the sound, giving you sufficient options to get the best performance out of your music, on the move, in the office or at home.
The Voyager portable headphone amp is purely analogue. It has no digital clocks to veil the sound. The Voyager can bring out the magic in the music, whatever source it comes from.
You can power this portable headphone amplifier from its 9 volt battery, a USB port, or its own AC adapter mains power supply.

Search the web for more Graham Slee articles with Google

Features

Fully portable headphone amplifier - long battery life
Powerful sound
Pod player size match
Lightweight - 180 gram (6.5 ounce)
Street 'phones contour-boost switch
USB powered for office desk top
AC adapter for home amp use
Drives Hi-Fi and Studio headphones

Features explained

The powerful sound from the Voyager portable headphone amplifier gives an average (noticeable) 10dB boost in sound pressure level above that of most portable players. The Voyager portable headphone amplifier's fast wideband circuit assures all the sound quality of the source is delivered to the headphones, even when used with high performance sources up to studio standards.

It is fully portable, powered by its own replaceable standard issue 9 volt (MN1604; 6LR61) battery (supplied installed). If left playing into headphones from a continuously looping music source, the battery can last 50 hours or longer. Usually however, battery life will last a number of weeks if the power switch is set to its other positions when not in use, or when being powered by USB connection or by its AC adapter. It does not recharge the battery - a rechargeable 9 volt battery does not have the capacity of a disposable 9 volt battery.

A number of pod type players will sit comfortably on top of the Voyager.

The Voyager is light weight, similar to that of a "classic" pod player.

The street-wear contour switch is designed to improve the tonal range of street-wear headphones. For use from domestic and studio players using Hi-Fi or studio headphones, the "flat" position may be found more appropriate.

The Voyager can be used in the office taking its input from line-out sources like the 3,5mm jack on many computers. While in use at the desk top, it can be powered by a spare USB cord having a mini AB plug.

The Voyager is supplied with an AC adapter that can power it when used at home or in the office

Hi-Fi and studio quality stereo headphones can be used with the Voyager. When using high impedance headphones at home (typically 300 Ohm types and above), it is best used with high output line-level sources like a CD player, amplifier line/tape out, or the output of a phono preamplifier, if required to reach high volumes. A 3,5 to 6,3mm jack plug adapter may be required for some Hi-Fi or studio headphones. A stereo phono to 3,5mm jack plug, or DIN to 3,5mm jack plug cable may also be required depending on your home equipment. It will not drive electrostatic headphones.
Headphones of 16 - 600 Ohms impedance can be used.

Graham Slee Voyager Portable Headphone Amplifier under the bonnet Inside view of the Voyager headphone amplifier surprisingly reveals the use of conventional through-hole components.
High-performance audio-grade components can be seen - an Alps potentiometer and Alps signal switches, Jalco jacks, a professional issue battery and clip, plus a number of audio-grade capacitors, sit on a single sided hand assembled solder masked fibreglass printed circuit board.
Removing the lid (not recommended) requires care not to break the switches, and because of its single supply partially dc-coupled configuration, "chip-rolling" (DIY tuning) may cause unpredictable results.

Specification

Dimensions: L. 12.5 W. 6.7 H. 2.8 (cm)
Weight: 180 grams approx. (700 grams with plug top PSU)
Case colour: Black
Case material: ABS and Polyester
Battery life: 50 hours continuous play, 2-3 weeks average usage
Output: 12mW rms into 32 Ohms, 10mW rms into 600 Ohms
Frequency Response: Flat: 5Hz to 70kHz (-3dB), Contour: +10dB at 45Hz and 20kHz
Channel Balance: 0.5dB*
Hum & Noise: -94dB CCIR Q-pk 20Hz-20kHz, <-100dB "A" curve weighted
Stereo Crosstalk: -52dB
Distortion (THD+Noise): at 80Hz: 0.03%, at 1kHz: 0.03%, at 5.6kHz: 0.05%, at 16kHz: 0.13%
Power sources: Battery, 9V (MN1604; 6LR61), USB 5V via "mini-B" (internal analogue voltage conversion to 9VDC), AC/DC mains adapter 12-24V DC, (polarity protection on each)
* = typical

GRAHAM SLEE PROJECTS LIMITED
1 Monks Way, Monk Bretton, Barnsley, S71 2JD
United Kingdom

Telephone
+44 (0) 1226 244908
+44 (0) 1909 568739
+44 (0) 7947 107188